First and foremost, asparagus is a hungry plant. Keep it well fed and it will remain happy. we recommend using a plant food that is specific to asparagus – like our Gurney’s® Asparagus Food. This is the basic maintenance requirement, along with mulching and weeding. A slow-release fertilizer will work great, adding nutrients as needed; apply it in the spring and again after harvest.

Also, you’ll want to check the makeup of your fertilizer to be sure your asparagus gets plenty of phosphorus and potassium. You can provide those nutrients by adding bonemeal and wood ash to the soil. Pellet fertilizers are fine, but make sure you combine them with organic matter. A top dressing of these materials after harvest and in the fall will help ensure good growth. Asparagus grows best in a sandy loam with a pH between 6.0 and 7.0.

After harvest and through the fall, leave the plant alone. Let them just do what asparagus do naturally! If your asparagus turns yellow, don’t worry, that’s normal. Even as it yellows, the foliage is still feeding the plant, so don’t cut it back until it totally dies back. At that point, usually in early winter, remove all remaining foliage. This will protect your plant from pests and disease.

And speaking of pests, the most common asparagus pest is the appropriately named “asparagus beetle.” Cutting the foliage back in the winter should keep the buggers away, but if not, you can always pick them off and drop them in soapy water to kill them.

That about covers asparagus care. Just remember the best protection against pests and disease is to keep your plants healthy and strong through feeding, weeding and mulching!

Hardening off takes two weeks, and entails gradually exposing your tender seedlings to the elements until they can be transplanted and live outside comfortably.

Beginning the Process

Start the hardening-off process two weeks before the seed’s outside planting date, which is dependent on the hardiness of the plant and the last frost date in your area. Once you’ve determine the date, begin by setting your seeds outside for a couple hours during the day in an area that’s shielded form sun and wind. Direct sun is a definite no-no for young seedlings at this stage, because it will burn the tender leaves. Remember to bring your seedlings in at night. Over the following days, you may increase the time your plants go outside, but do so gradually.

Your Seedlings are Almost Ready

After a few days of gradual and protected outside exposure, you can step up your efforts a notch. Leave your plants out longer and put them in sunnier, cooler, and windier spots. Although some evidence suggests that tomatoes respond well to fertilization at this point, generally it’s not a good idea to feed or overwater your plants right now – remember, you’re trying to toughen them up!

Ready, Set, Grow!

After two weeks of increasing exposure, it’s time to plant them for good. Water the ground thoroughly, and dig a hole just a few inches deeper than the pot in which your seedlings are currently residing. Holding your seedling by the stem, place the seedling in the hole and cover it gently with soil. Once the hole is filled, create a depression around the rim of the plant where water can collect. Be sure to water frequently and to fertilize after this final step. If your weather turns nasty, you can protect your seeds with sun shields, wind blocks, or Gurney’s Tunlcover™ Plant Protector cold covers.

On a Feeding Schedule

Now that the plant has sprouted and gone through the food supply provided by the seed itself, you’re responsible for feeding the burgeoning baby plant. You should feed your seedlings one-quarter strength plant food. If the solution is too strong, it will burn the baby plant. Use room temperature water when you are watering your plant.

After the little plants have formed their second set of real leaves, they are ready to be transplanted into bigger pots. Dislodge the soil using a fork or pencil and gently lift the plant out of the pot, then dangle the plant over its new pot and sprinkle the roots with soil. Once your seedlings have grown a few more inches, they’ll be ready to face the great outdoors. You have to introduce them slowly, however, through a process called hardening off. We’ll go over this process in our next blog post!

Gurney’s Seed Starting Kit

Looking for an easier way to start seeds? I’m really excited about our new Seed Starting Kit. We’ve assembled the absolute best way to start seeds. You’ll get healthy and hearty plants every time! The best part is it’s clean…no fussing with messy potting soil or Dixie cups.

Our Seed Starting Kit allows you to quickly, easily and successfully start all kinds of seeds. Each kit contains everything you need for fast germination and vital root growth. The soil-less grow plugs are made of natural, biodegradable materials so that each plug can be directly transplanted into the garden greatly reducing transplant shock. Each grow plug contains beneficial bacteria to aid in maximum seed germination.

The lightweight 55-cell growing tray wraps each grow plug in warmth and floats them in the water-filled reservoir tray, allowing each seed to get the perfect water-to-air ratio. The humidity dome holds in the warmth and moisture, ensuring early and uniform seed germination

I recently had the opportunity to give the Seed Starting Kit a try, and let me tell you, it works! This is by far the easiest method I have ever used. It allows me to do more – and easily. Give it a try today!

Let’s Get Started

Once you’ve found the right seed varieties for you, you’ll need to determine the proper start date. Typically, seeds are started indoors 8 to 10 weeks before the last frost.

Get your seedlings off to a good start by using the right growing medium. A perfect growing mix is very light and holds moisture well. Avoid using potting soil, which becomes too dense after a few waterings and doesn’t allow good air and water circulation. Additionally, regular potting soil can introduce bacteria to a young seed, resulting in its death. If you don’t want to buy a mix, you can create your own by combining 2 parts peat or sphagnum moss with 1 part perlite and 1 part vermiculate. This will not have the nutrients usually included in a commercial mix, however.

Where to Start Your Seeds

The first container for your seeds should be no more than three inches deep and provide good drainage. If you don’t want to buy containers specifically designed for starting seeds, you’ll need to create your own: empty egg cartons, cut-off milk cartons, or deep-sided disposable aluminum pans work fine. Make sure you punch drainage holes in the bottom.

Planting Your Seeds

The general rule of thumb is to plant seeds four times as deep as the seed is wide. Fine seeds, such as petunia seeds, should be sprinkled on top of the medium but not covered. When using individual containers, plant more than one seed in each cell; you’ll need extras since you seldom get 100% germination. If you’re using flats, space seeds a half inch apart only if they’ll be transplanted into a separate pot following germination. If they’re going to stay in the flat until they head outside, space the seed one to two inches apart. Label your seeds, because most seedlings look alike.

Watering Your Seeds

Once they’re planting, you won’t have to worry about feeding your little guys at first. Seeds contain their own food supply packaged neatly within their shells. Make sure you keep them mist, since most seeds absorb water and use it to bust through their shells. Daily checkups are necessary at this point. To water, you can either use a spray bottle, or set up a bottom watering system (this way, seeds can take as much water as they need.) If you choose a bottom watering system, it’s important to avoid letting your pots sit in a pool of water; this can lead to a moldy pot and a dead seed.